View IPv6 RP Set Parameters
View the IPv6 RP set to see a list of rendezvous point addresses and to view the parameters for troubleshooting purposes.
Procedure
- In the navigation pane, expand .
- Select IPv6 PIM.
- Select the RP Set tab.
RP Set Field Descriptions
Use the descriptions in the following table to use the RP Set tab.
Name |
Description |
---|---|
GroupAddress |
Specifies the IPv6 address of the multicast group. When combined with the group mask, this value identifies a group prefix for which the address is a static RP. |
GroupMask |
Specifies the address mask of the multicast group. When combined with the group address, this value identifies a group prefix for which the address is a static RP. |
Address |
Specifies the IPv6 address of the static RP. |
HoldTime |
Specifies the hold time of the static RP. The value is 0. |
ExpiryTime |
Specifies the minimum time remaining before the static RP is down. The value is 0. |